Engineered with high-strength die-cast aluminium alloy and impact-resistant polymer casing, our Raised Pavement Markers (Road Studs / Cat's Eyes) strictly comply with ASTM -4820 specifications, delivering supreme retroreflectivity and structural resilience.
PB Road Safety Solutions Raised Pavement Markers are manufactured to withstand the constant pounding of heavy commercial trucks and multi-axle trailers. The microprismatic retroreflective optical lenses are vacuum metallized and hermetically welded to guarantee moisture resistance and lifelong brilliance.
SKU: RPM-101
Product Name: Raised Pavement Marker (Road Stud)
Compressive Load: ≥25 Tonnes (Heavy Commercial Vehicle Tested)
Housing Material: ADC12 Die-Cast Aluminium Alloy or Polycarbonate/ABS
Dimensions: 100 mm x 100 mm x 20 mm (50 mm Shank)
Reflector Lens: Bi-Directional PMMA Microprismatic with Protective Glass Face
Standard Compliance: ASTM -4820, IRC:35-2015 (Clause 10.3), MoRTH, EN 1463
| SKU | SKU-008 |
|---|---|
| Product Name | Raised Pavement Marker Road Studs (ASTM -4820) |
| Brand | PB Safety |
| SKU | RPM-101 |
| Product Name | Raised Pavement Marker (Road Stud) |
| Compressive Load | ≥25 Tonnes (Heavy Commercial Vehicle Tested) |
| Housing Material | ADC12 Die-Cast Aluminium Alloy or Polycarbonate/ABS |
| Dimensions | 100 mm x 100 mm x 20 mm (50 mm Shank) |
| Reflector Lens | Bi-Directional PMMA Microprismatic with Protective Glass Face |
| Standard Compliance | ASTM -4820, IRC:35-2015 (Clause 10.3), MoRTH, EN 1463 |
Find answers to common questions about specifications, bulk orders, and highway compliance.
Markers with shanks are installed by drilling a 50mm hole into the pavement surface, clearing dust with compressed air, pouring specialized two-component epoxy adhesive mortar, and inserting the shank firmly. Pavement markers without shanks are bonded directly to cleaned asphalt using high-strength bitumen or epoxy pads.
As per IRC:35 guidelines: White road studs indicate lane line dividers and centerlines; Amber (Yellow) studs mark the right-hand edge of dual carriageways and median dividers; Red studs denote the left-hand road shoulder or hazard line; and Green studs indicate deceleration lanes and entry/exit slip roads.